癞子斗地主

What are the daily inspection contents of the aerial work platform?

You don’t know how to check after the aerial work platform is bought. Let me tell you what the work is!

1) Aerial work platform assembly - no loose, missing parts, no appearance damage; lock bolts are not misplaced; foot switch is flexible, has not been modified, and is not locked.

2) Upper console - all function control button switches and control handles are all in the middle position, fixed and reliable, no loose, missing parts, no

The appearance is damaged, the label and the nameplate are firmly attached, the writing is clear, and the function control label is clear and correct.

3) Arm cylinder - the appearance is intact, the pin is fastened reliably; the hydraulic lines and joints are not damaged, and there is no looseness or leakage.

4) Up-level flat oil cylinder - the appearance is intact, the pin shaft is securely fastened; the hydraulic lines and joints are not damaged, and there is no looseness or leakage.

5) Lifting arm parts and lifting cylinders - no appearance damage, reliable pin fastening; no damage to hydraulic lines and joints, no looseness

And leaks.

6) Wheel/tire assembly (right rear) - securely fixed, tire bolts and tire nuts are complete without looseness, and the appearance is intact without damage.

7) Drive motor, brake and drive reducer (right rear) - no appearance damage, no oil leakage.

8) Battery - there is an appropriate amount of electrolyte; the wire is connected reliably, and the appearance is free from damage and corrosion.

9) Hydraulic pump station - the installation is fixed and secure, and the appearance is intact.

10) Engine air filter - no loose or missing parts, no wear or damage to the appearance.

11) Silencer and exhaust system - the silencer is fixed and reliable, check the cooling level.

12) Oil supply system - check the oil gauge, the oil level is between the lowest scale and the highest scale, and the fuel filler is installed reliably.

13) Drive motor, brake and drive reducer (front right) - no damage to the appearance, no leakage.

14) Wheel/tire assembly (right front) - securely fastened, tire bolts and tire nuts are complete without looseness, and the appearance is intact without damage.

15) Right side cover - reliable and reliable, no loose and missing parts, flexible switch.

16) Left side cover - reliable and reliable, no loose and missing parts, flexible switch.

17) Hydraulic oil supply system - check the caliper oil level within the specified liquid level (check the oil level should be in the cold state)

Check, turn off the system, the machine is in the fully collapsed position state). The appearance of the fuel filler and the casing is intact and there are no signs of oil leakage.

Hydraulic oil filter - to ensure that the appearance is not damaged, there is no trace of oil leakage.

18) Wheel/tire assembly (left front) - securely fixed, tire bolts and tire nuts are complete without looseness, and the appearance is intact without damage.

19) Drive motor, brake and drive reducer (front left) - no appearance damage, no oil leakage.

20) Floating bridge - no loose or missing parts, no damage to appearance.

21) Steering mechanism and steering rods - the connection parts are reliable and not loose, and the parts are complete; the appearance is intact and not damaged.

Steering cylinders - reliable connection, complete parts, no signs of oil leakage.

22) Function valve - no loose or missing parts, leakage, no pipe wear and abrasion.

23) Lower controller——The function control button switch is flexible and intact; the label is reliable and the writing is clear.

24) Fuel supply system - the fuel cap is fixed and reliable, and the appearance of the diesel tank is not damaged or leaked.

25) Slewing support - fixed and reliable, no loose and missing parts; good appearance and no damage, good lubrication of rotary support. Fixing bolt no

Loose phenomenon, the slewing bearing and the structural parts are not loose. Slewing motor and slewing reducer assembly - the installation is fixed and secure without missing parts, the appearance is intact and the lubrication is good.

26) Wheel/tire assembly (left rear) - securely fixed, tire bolts and tire nuts complete without looseness, intact appearance and no damage.

27) Drive motor, brake and drive reducer (left rear) - no appearance damage, no leakage.

28) Swing cylinder - the installation connection is reliable and intact; the hydraulic lines and joints are securely connected without leakage.

29) The entrance of the aerial work platform - door locks, railings, etc. are safe and reliable, without looseness and missing parts.


GB体育 足彩论坛 足彩吧 途游游戏 鲨鱼电竞 炉石传说竞猜 趣味捕鱼 网易棋牌 幸运十二生肖 顶呱刮